Rancang Bangun Purwarupa Alat Pengayun Ranjang Bayi Menggunakan Sensor Suara Berbasis Mikrokontroler Atmega328

Authors

  • Antonius Son Gelu Universitas Bung Karno
  • Yoga Listi Prambodo Universitas Bung Karno
  • Mega Tri Kurnia Universitas Bung Karno

DOI:

https://doi.org/10.59039/sikomtia.v1i2.13

Keywords:

Baby Crib, Prototype Device, Automatic Swing, Microcontroller ATMega328, Sound Sensor

Abstract

Baby cribs typically require human effort to swing, which can be time-consuming and exhausting if done manually by a person continuously. Hence, the idea emerged to design a prototype device that can automatically swing the baby crib, helping to ease the mother's task, just like cradling a baby. The purpose of this prototype device is to lighten the burden of mothers who often become fatigued when soothing their children and then need to leave them in a calm state to attend other activities. This device can automatically swing the crib triggered by the sound of a crying baby, which will be detected by a sound sensor and processed by the ATmega328 microcontroller on Arduino. Subsequently, Arduino commands the servo motor to activate and swing the baby crib. Having this device will provide benefits in assisting a mother to soothe her baby while still being able to carry out other activities.

Downloads

Download data is not yet available.

References

K. Hardjito, S. D. Antono, dan E. R. Yani, “Perbedaan peran ibu primipara dan multipara dalam pengasuhan bayi baru lahir,” J. Ilmu Kesehat., vol. 3, no. 2, hal. 12–19, 2017.

A. D. Putra dan S. Suaidah, “Teknologi Pengendali Perangkat Elektronik Menggunakan Sensor Suara,” J. Teknol. dan Sist. Tertanam, vol. 2, no. 2, hal. 46, 2021, doi: 10.33365/jtst.v2i2.1341.

A. Pratama, S. R. Andani, dan A. Wanto, “Penerapan Mikrokontroler Arduino Uno pada Desain Perancangan Sistem Ayunan Bayi Otomatis,” J. Informatics …, vol. 1, no. 3, hal. 108–114, 2021.

A. Fahmi, “Rancang Bangun Prototipe Ayunan Bayi Otomatis Berbasis Wemos D1 Dan Android Akhmad Fahmi,” ePrints UTY Open Acces Repos., 2018.

Muammar, Syarli, dan S. Fuji Kinasih, “Pengontrolan Ayunan Bayi Otomatis Dengan Mendeteksi Sensor Suara Menggunakan Mikrokontroler Arduino,” J. Ilm. Ilmu Komput., vol. 4, no. 2, hal. 17–20, 2018, doi: 10.35329/jiik.v4i2.40.

N. Nursalim, D. E. D. . Pollo, dan E. Y. W. Paratu, “Perancangan Sistem Kontrol Ayunan Bayi Otomatis Dan Monitoring Sensor Menggunakan Aplikasi Android,” J. Media Elektro, hal. 22–31, 2021, doi: 10.35508/jme.v0i0.3808.

A. Z. Assahlanie, K. Anwar, dan S. Setyowibowo, “Monitoring Suara Tangisan Bayi Menggunakan Sensor Suara Berbasis Arduino dan Nodemcu ESP 8266,” seminar.iaii.or.id, vol. 1, no. 3, hal. 129–134, 2021.

Z. I. Tualeka, A. U. Bani, dan F. Nugroho, “Perancangan dan Pembuatan Prototype Alat Terapi Kaki Pasca Stroke Berbasis Arduino Atmega328”.

A. Muhammad Satria Nugroho, “Implementasi Stepper 28BYJ-48 dan Servo MG996R sebagai Robot Lengan Pemanggang pada Alat Pemanggang Sate Otomatis Berbasis Arduino UNO,” Electrician, vol. 15, no. 2, hal. 96–99, 2021, doi: 10.23960/elc.v15n2.2169.

A. Radotti, D. H. Wicaksono, W. Mardhiani, H. Hidayati, dan F. Prasetyanto, “Pendeteksi Dan Perangkap Nyamuk Otomatis Berbasis Iot,” eProceedings Appl. Sci., vol. 4, no. 3, hal. 2973–2981, 2018.

O. R. Arsyad dan K. P. Kartika, “Rancang Bangun Alat Pengaman Brankas Menggunakan Sensor Sidik Jari Berbasis Arduino,” JATI (Jurnal Mhs. Tek. Inform., vol. 5, no. 1, hal. 1–6, 2021, doi: 10.36040/jati.v5i1.3285.

W. Sintia, D. Hamdani, dan E. Risdianto, “Rancang Bangun Sistem Monitoring Kelembaban Tanah dan Suhu Udara Berbasis GSM SIM900A dan Arduino Uno,” J. Kumparan Fis., vol. 1, no. 2, hal. 60–65, 2018, doi: 10.33369/jkf.1.2.60-65.

A. Yudhana, Sunardi, dan Priyatno, “Perancangan Pengaman Pintu Rumah Berbasis Sidik Jari Menggunakan Metode Uml,” J. Teknol., vol. 10, no. 2, hal. 131–138, 2018, doi: 10.24853/jurtek.10.2.131-138.

F. Kurniawan dan A. Surahman, “Sistem Keamanan Pada Perlintasan Kereta Api Mengunakan Sensor Infrared Berbasis Mikrokontroller Arduino Uno,” J. Teknol. dan Sist. Tertanam, vol. 2, no. 1, hal. 7, 2021, doi: 10.33365/jtst.v2i1.976.

D. Nurlette dan T. K. Wijaya, “Perancangan Alat Pengukur Tinggi Dan Berat Badan Ideal Berbasis Arduino,” Sigma Tek., vol. 1, no. 2, hal. 172, 2018, doi: 10.33373/sigma.v1i2.1515.

Downloads

Published

30-06-2023

How to Cite

Gelu, A. S., Prambodo, Y. L., & Kurnia, M. T. (2023). Rancang Bangun Purwarupa Alat Pengayun Ranjang Bayi Menggunakan Sensor Suara Berbasis Mikrokontroler Atmega328 . Sistem Komputer Dan Teknologi Intelegensi Artifisial (SIKOMTIA), 1(2), 137–148. https://doi.org/10.59039/sikomtia.v1i2.13

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>